Updated 31st March 2001
Updated 31st March 2001
The Perseus Ribbon LCR (Left/Center/Right) has a corrugated 4" ribbon driver mounted in the middle flanked by a pair of 6.5" port-loaded cone woofers. The ribbon is built into a square mounting box and can be unscrewed and rotated by 90 degrees.
In one position you have a classic D'Appolito configuration, which can be mounted horizontally above or below the monitor or screen. The other way, it can be positioned vertically to the sides of the screen, for front channel use as shown on the left. The back of the speaker houses two pairs of gold-plated metal binding posts, allowing bi-wiring or bi-amping. The woofer port is located on the rear and a foam plug is supplied if you wish to partly plug the port to reduce the bass output.
|
Specifications |
|
|
Height |
24 inches |
|
Width |
9½ inches |
|
Depth |
11½ inches |
|
Bass driver |
(2) 6.5" port loaded dynamic woofers |
|
Midrange/tweeter |
4" rotatable ribbon tweeter |
|
Max Sound Level |
~103db |
|
Sensitivity @ 3m |
~84dB |
|
Frequency response |
45Hz - 25kHz |
|
Crossover frequency |
~1kHz |
|
Suggested amp power |
100W (4 ohms) |
|
Impedance nominal/minimum |
6ohms / 4ohms |
|
Weight |
40lbs each |
|
Finishes available |
Black, veneer finish extra |
|
Price (1996) |
$1000 Veneer finish $1100 |
|
Current price |
|
Copyright Apogee Speaker Users Website